Gardena T 1030 Opearting Instructions - Start Time
10
The timer should be programmed as follows:
Step 1
Step 2
Step 3
Setting
Setting
Start Time
▲
▲
Frequency
Run Time
key
Example a)
24 h
10 min.
do not press
Example b)
8 h
2 min.
press once
Example c)
3
rd
60 min.
press 7 times
The watering time has now been changed. The water timer will now
automatically run the required watering programs.
9.4 Turning off the watering programs
The watering programs can be switched off for any period of time
e.g. in periods of bad weather as follows:
1. Turn the Run Time knob
3
clockwise to Off.
2. To restart the watering e.g. at the end of the bad weather period,
turn the Run Time knob
3
back to the required watering time.
Note : The starting time you previously selected remains unchanged
so that your garden is watered at the usual times (the times you pro-
grammed).
9.5 Manual On / Off operation
In addition to watering your garden fully automatically, the Water Timer
can be operated manually by turning the Run Time knob
3
to On or Off.
Automatic watering programs during this time are not executed or inter-
rupted. After manually opening / closing the valve (On / Off) you can once
again select a watering time. A watering starting time which you deter-
mined earlier remains unchanged.
“On” position
In the On position the valve is opened after a delay of 2 seconds and then
automatically closed again after 30 minutes. If the water timer is switched
to On during an automatic watering program the valve stays open and is
closed after 30 minutes.
“Off” position
In the Off position, an open valve is closed after a delay of 2 seconds.