Garland XE362S-2L Service manual - Programming
Page 26
PROGRAMMING
continued
Menu Items...
To Change the Cook Time of a Product:
1. Press and hold for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter Programming Mode. “PROGRAMMING
MODE MENU ITEMS” is displayed.
4. Press . “MENU ITEMS STANDBY” is displayed.
5. Use and to choose the desired Menu Item.
6. Press to display “(MENU ITEM) COOK TIME XX:XX”
7. Use and to adjust the cook time.
8. Press to save the changes.
9. Press twice to exit.
To Turn Platen, (2-Sided), Cooking On/Off:
1. Press and hold for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press . “MENU ITEMS STANDBY” is displayed.
5. Use and to choose the desired Menu Item.
6. Press twice to display “(MENU ITEM) UPPER PLATEN
YES/NO “.
7. Use and to turn upper platen on or off.
8. Press to save the changes.
9. Press twice to exit.
To Change Upper Platen Set Temperature:
1. Press and hold for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press . “MENU ITEMS STANDBY” is displayed.
5. Use and to choose the desired Menu Item.
6 Press three, (3) times to display “(MENU ITEM) UPPER
TEMP XXX” displayed in °F or °C.
7. Use and to change the set temperature to the
desired value.
8. Press to save the changes.
9. Press twice to exit.
To Change Grill Set Temperature:
1. Press and hold for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press . “MENU ITEMS STANDBY” is displayed.
5. Use and to choose the desired Menu Item.
6. Press four, (4) times to display “(MENU ITEM) GRILL
TEMP XXX” displayed in °F or °C.
7. Use and to change the set temperature to the
desired value.
8. Press to save the changes.
9. Press twice to exit.
To Change Product Gap Setting:
1. Press and hold for three, (3) seconds. “ENTER CODE” is
displayed.
2. Using the Product buttons, 0-9 enter the code, (1251).
“ENTER CODE **** ” is displayed.
3. Press to enter the Programming Mode.
“PROGRAMMING MODE MENU ITEMS” is displayed.
4. Press . “MENU ITEMS STANDBY” is displayed.
5. Use and to choose the desired Menu Item.
6. Press five, (5) times to display “GAP XXX” displayed in
inches or mm.
7. Use and to change the gap setting to the desired
value.
8. Press to save the changes.
9. Press twice to exit.