Garmin Apollo CNX80 Installation Manual - page 58
Installation Procedures
2-28
560-0982-00 Rev D
Apollo CNX80 Installation Manual
2.8.7.4 Approach
Annunciation
P5-61 Approach
Annunciate
The Approach Annunciate output is grounded when performing approach navigation and approach is
active.
If an external annunciator is used for approach annunciation, it is recommended that the approach
annunciator be labeled “APPR” in green text.
2.8.7.5 Parallel Track Annunciation
P5-62 Parallel Track Annc
The Parallel Track Annc output is grounded whenever the parallel track mode has been selected.
If an external annunciator is used for parallel track annunciation, it is recommended that the parallel track
annunciator be labeled “PTK” in white text.
2.8.7.6 Suspend
Annunciation
P5-63 Suspend Annunciate
The Suspend Annunciate output is grounded when automatic sequencing of waypoints in the active flight
plan has been suspended (either manually by the user or automatically by the CNX80).
If an external annunciator is used for suspend annunciation, it is recommended that the suspend
annunciator be labeled “SUSP” in white text.
2.8.7.7 Message
Annunciation
P5-64 Message Annunciate
The Message annunciator flashes when a new status message is available. If a status message has been
acknowledged but is still effective, the Message annunciator illuminates continuously.
If an external annunciator is used for message annunciation, it is recommended that the message
annunciator be labeled “MSG” in white or amber text.
2.8.7.8 LOI (Loss of Integrity) Annunciation
P5-65 LOI
Annunciate
The LOI Annunciate output is grounded when the WAAS / GPS detects a position error, or is unable to
calculate the integrity of the position (RAIM unavailable).
If an external annunciator is used for loss of integrity annunciation, the loss of integrity annunciator should
be labeled “LOI” in amber text.