Garmin Apollo CNX80 Installation Manual - page 86
Post-Installation Configuration & Checkout
3-14
560-0982-00 Rev D
Apollo CNX80 Installation Manual
Table 3-3 – Lamp Output Test Items
Display
Label Signal
Name
Connector -
Pin Notes
MSG Message
Annunciate P5-64
PTK
Parallel Track Annc
P5-62
SUSP
Suspend Annunciate
P5-63
APR Approach
Annunciate P5-61
LOI LOI
Annunciate
P5-65
ALT
Altitude Alert Annc
P5-69
PAA
Precision Appr
P5-68
TRM
Term Mode Annc
P5-67
WPT Waypoint
Annunciate P5-66
BCKCRS
Back Course Out
P7-15
GPSIND
GPS Indicator Out
P7-17
The GPSIND and NAVIND toggle, so one is always ON
NAVIND
NAV Indicator Out
P7-18
The GPSIND and NAVIND toggle, so one is always ON
DR
Dead Reck Annunciate
P5-60
For each annunciator that is used, verify proper operation by turning the annunciator ON and OFF.
Press the
TEST
or
BACK
smart key to return to the Ground Maintenance Test menu.
3.3.1.1.5 Display Test
The Display Test function displays various test patterns and can be used to verify the CNX80 display
operation. While on the Ground Maintenance main TEST menu page, press the
NEXT PAGE
line select
key, followed by the
DISPLAY
line select key to go to the Display Test page. Turn the outer knob while on
any Test Pattern page to display the next Test Pattern Page in the sequence. The order of test pages is
Fonts 1, Fonts 2, Fonts 3, Bitmaps, Red, Green, Blue, White, Black, White on Black, and Black on White.
The first available display test screen is shown in Figure 3-15.
Figure 3-15 - Display Test Initial Screen
Press the
TEST
or
BACK
smart key to return to the Ground Maintenance Test menu.