Garmin Edge 1000 Owner's Manual

Manual is about: Cycling GPS-devices

Summary of Edge 1000

  • Page 1

    Edge ® 1000 owner’s manual march 2014 190-01694-00_0a printed in taiwan.

  • Page 2

    All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organizat...

  • Page 3: Table of Contents

    Table of contents introduction.................................................................... 1 getting started........................................................................... 1 charging the device .................................................................. 1 about the battery...

  • Page 4

    Cleaning the device ............................................................ 14 caring for the heart rate monitor ....................................... 14 user replaceable batteries ..................................................... 14 replacing the heart rate monitor battery .................

  • Page 5: Introduction

    Introduction warning see the important safety and product information guide in the product box for product warnings and other important information. Always consult your physician before you begin or modify any exercise program. Getting started when using your device the first time, you should comple...

  • Page 6

    8 press down slightly and turn the edge device clockwise until it locks into place. Releasing the edge 1 turn the edge clockwise to unlock the device. 2 lift the edge off the mount. Turning on the device the first time you turn on the device, you are prompted to configure system settings and profile...

  • Page 7: Training

    Training going for a ride before you can record speed and distance, you must locate satellite signals or pair your device with an optional ant+ speed sensor. Note: history is recorded only while the timer is running. 1 from the home screen, select ride. 2 wait while the device locates satellites. 3 ...

  • Page 8

    4 select back to step, and select a step to repeat. 5 select to save the step. Starting a workout 1 from the home screen, select workouts. 2 select a workout. 3 select ride. After you begin a workout, the device displays each step of the workout, the target (if any), and current workout data. An aud...

  • Page 9: Ant+ Sensors

    4 scroll to the virtual partner page. 5 select or to adjust the percentage of time to complete the course. For example, to improve your course time by 20%, enter a course speed of 120%. You will race against the virtual partner to finish a 30-minute course in 24 minutes. Stopping a course 1 scroll t...

  • Page 10

    Putting on the heart rate monitor note: if you do not have a heart rate monitor, you can skip this task. You should wear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your activity. 1 snap the heart rate monitor module À o...

  • Page 11

    The sensor may be tilted when installed on an asymmetrical hub. This does not affect operation. 3 rotate the wheel to check for clearance. The sensor should not contact other parts of your bike. Note: the led flashes green for five seconds to indicate activity after two revolutions. Installing the c...

  • Page 12: History

    Using the weight scale if you have an ant+ compatible weight scale, the device can read the data from the weight scale. 1 from the home screen, select > weight scale. A message appears when the weight scale is found. 2 stand on the scale when indicated. Note: if using a body composition scale, remov...

  • Page 13: Navigation

    Courses, workouts, and training plans: activities previously selected from garmin connect are sent wirelessly to your device. Software updates: your device wirelessly downloads the latest software update. The next time you turn on the device, you can follow the on-screen instructions to update the s...

  • Page 14

    1 from the home screen, select the status bar or swipe down from the top of the page. The connections page appears. 2 select gps > mark location > . Saving locations from the map 1 from the home screen, select where to? > > a map point. 2 browse the map for the location. 3 select the location. Locat...

  • Page 15

    Creating a round-trip route the device can create a round-trip route based on a specified distance and a starting location. 1 from the home screen, select where to? > round-trip routing. 2 select distance, and enter the total distance for the route. 3 select start location. 4 select an option: • sel...

  • Page 16: Customizing Your Device

    Customizing your device profiles the edge has several ways for you to customize the device, including profiles. Profiles are a collection of settings that optimize your device based on how you are using it. For example, you can create different settings and views for training and mountain biking. Wh...

  • Page 17

    1 from the home screen, select > activity profiles. 2 select a profile. 3 select auto features > auto lap > auto lap trigger > by position > lap at. 4 select an option: • select lap press only to trigger the lap counter each time you select and each time you pass any of those locations again. • sele...

  • Page 18: Device Information

    Changing the configuration settings you can modify all of the settings you configured in the initial setup. 1 select > system > device reset > initial setup. 2 follow the on-screen instructions. Time zones each time you turn on the device and acquire satellites, the device automatically detects your...

  • Page 19: Troubleshooting

    2 twist the cover counter-clockwise until the marker points to unlocked and the cover is loose enough to remove. 3 remove the cover and the battery Á . 4 wait 30 seconds. 5 insert the new battery with the positive side facing up. Note: do not damage or lose the o-ring gasket. 6 twist the cover clock...

  • Page 20

    Balance - avg.: the average left/right power balance for the current activity. Balance - lap: the average left/right power balance for the current lap. Battery level: the remaining battery power. Cadence: the number of revolutions of the crank arm or number of strides per minute. Your device must be...

  • Page 21

    Temperature: the temperature of the air. Your body temperature affects the temperature sensor. Time: the stopwatch time for the current activity. Time - avg. Lap: the average lap time for the current activity. Time - elapsed: the total time recorded. For example, if you start the timer and run for 1...

  • Page 22

    “software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the software remain in garmin and/or its third- party providers. You acknowledge that the software is the property of garmin and/or its third-party provid...

  • Page 23: Index

    Index a accessories 5, 7, 15 addresses, finding 10 alerts 3 altimeter, calibrating 13 ant+ sensors 2, 5, 7 pairing 7 applications 8 auto lap 12, 13 auto pause 12 auto scroll 13 auto sleep 15 b back to start 10 backlight 2, 13 bands 15 battery charging 1 maximizing 15 replacing 14 type 1 bluetooth te...

  • Page 24: Www.Garmin.Com/support

    Www.Garmin.Com/support 913-397-8200 1-800-800-1020 0808 238 0000 +44 (0) 870 8501242 1-866-429-9296 +43 (0) 820 220230 + 32 2 672 52 54 +385 1 5508 272 +385 1 5508 271 +420 221 985466 +420 221 985465 + 45 4810 5050 + 358 9 6937 9758 + 331 55 69 33 99 + 39 02 36 699699 (+52) 001-855-792-7671 0800 023...