Garmin Edge 200 Owner's Manual - Acquiring Satellite
Manual is about: Important Safety and Product Information
of
16
6
Edge200Owner’sManual
acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. Make sure that the front of the Edge
is oriented toward the sky.
3. Wait while the Edge searches for
satellites.
The time of day and date are set
automatically.
Going for a ride
Before you can record history, you
must acquire satellite signals (
1. Select Ride.
2. Select Start to start the timer.
History is only recorded while the
timer is running.
3. After completing your ride, select
.
Training indoors
You can turn off GPS when you are
training indoors.
1. Select Ride > Start.
A message appears asking if you
want to use the device indoors.
2. Select Yes.
GPS automatically turns back on when
indoor training is complete.
Saving Your ride Data
Select Save to save your ride data
and reset the timer.