Garmin Edge 305 Owner's Manual

sensors

3.  Place the heart rate monitor directly on your skin, just 

below the breastplate. Wrap the strap around your chest 

and attach the strap to the other side of the heart rate 

monitor. 

4.  Tighten or loosen the strap as necessary so that it fits 

snugly against your body.

➋

 Configure Your GPS Device

1.  Turn on your GPS device.

2.  Bring it within range (3 meters) of the heart rate monitor. 

3.  Press 

mode

 to access the 

Main 

Menu

. 

4.  Go to the Accessories page. For 

example, on the Edge

™

 305, select 

Settings

 > 

System

 > 

Accessories

.

5.  In the 

Heart Monitor

 field, select 

Yes

. 

6.  Make sure there are no other sensors 

around you. Select 

Restart Scan

. 

Note:

 To set up custom data fields on your GPS device to display 

heart rate data, refer to your owner’s manual.

➊

 Position the Heart Rate Monitor

1.  Push one tab on the elastic strap through the slot in the 

heart rate monitor.

2.  Wet both sensors on the back of the heart rate monitor to 

create a strong connection between your pulse and the 

transmitter.

For more information on using the heart rate monitor with your  

GPS device, refer to your owner’s manual.

April 2006 

190-00651-00 Rev. B 

Printed in Taiwan

Example: Edge 305