Garmin EDGE 500 Quick Start Manual - Menu

Edge 500 Owner’s Manual 

ANT+ Sensors

To turn the non-zero averaging on or 

off, press and hold 

MENU

, and select 

Settings

 > 

Bike Settings

 > 

Data Avg

.

replacing the GSC 10 

Battery

The GSC 10 contains a user-

replaceable CR2032 battery. 

NOTE: Contact your local waste 

disposal department to properly 

dispose of batteries. 

1.  Locate the circular battery cover on 

the side of the GSC 10.

Battery 

cover

CR0 

battery

2.  Use a coin to twist the cover 

counter-clockwise until it is loose 

enough to remove (arrow points to 

unlocked).

3.

Remove the cover and battery. 

4.  Wait 30 seconds. 

5.  Insert the new battery with the 

positive side facing up.

NOTE: Be careful not to damage 

or lose the O-ring gasket on the 

cover. 

6.  Use a coin to twist the cover back 

into place (arrow points to locked).

Arrow

Locked

Unlocked

Battery 

cover