Garmin Edge 820 Owner's Manual - page 7
You can swipe down from the top of the data screens to view
the connections screen.
6
If necessary, tap the screen to view the timer overlay.
7
Select to stop the timer.
TIP:
Before you save this ride and share it on your Garmin
Connect account, you can change the ride type. Accurate
ride type data is important for creating bike friendly courses.
8
Select
Save Ride
.
9
Select .
Acquiring Satellite Signals
The device may need a clear view of the sky to acquire satellite
signals. The time and date are set automatically based on the
GPS position.
1
Go outdoors to an open area.
The front of the device should be oriented toward the sky.
2
Wait while the device locates satellites.
It may take 30–60 seconds to locate satellite signals.
Locations
You can record and store locations in the device.
Marking Your Location
Before you can mark a location, you must locate satellites.
If you want to remember landmarks or return to a certain spot,
you can mark a location.
1
Go for a ride.
2
Select
Where To?
>
>
Mark Location
> .
Saving Locations from the Map
1
Select
Where To?
>
>
Search Select Area
>
A Map
Point
.
2
Browse the map for the location.
3
Select the location.
Location information appears at the top of the map.
4
Select the location information.
5
Select > .
Navigating to a Location
1
Select
Where To?
.
2
Select an option:
• Select
Search Tools
to navigate to a point of interest, city,
intersection, or known coordinates.
• Select
Addresses
to enter a specific address.
• Select
Saved Locations
to navigate to a saved location.
• Select
Recent Finds
to navigate to one of the last 50
locations you have found.
• Select
>
Search Select Area
to narrow your search
area.
3
Select a location.
4
Select
Ride
.
5
Follow the on-screen instructions to your destination.
Navigating to Known Coordinates
1
Select
Where To?
>
Search Tools
>
Coordinates
.
2
Enter the coordinates, and select .
3
Follow the on-screen instructions to your destination.
Navigating Back to Start
At any point during your ride, you can return to the starting point.
1
Go for a ride (
).
2
During your ride, select anywhere on the screen to view the
timer overlay.
3
Select >
Where To?
>
Back to Start
.
4
Select
Along Same Route
or
Most Direct Route
.
5
Select
Ride
.
The device navigates you back to the starting point of your
ride.
Stopping Navigation
1
Select anywhere on the screen to view the timer overlay.
2
Scroll to the map.
3
Select > .
Projecting a Location
You can create a new location by projecting the distance and
bearing from a marked location to a new location.
1
Select
Where To?
>
Saved Locations
.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select >
Project Location
.
5
Enter the bearing and distance to the projected location.
6
Select .
Editing Locations
1
Select
Where To?
>
Saved Locations
.
2
Select a location.
3
Select the information bar at the top of the screen.
4
Select .
5
Select an attribute.
For example, select Change Elevation to enter a known
altitude for the location.
6
Enter the new information, and select .
Deleting a Location
1
Select
Where To?
>
Saved Locations
.
2
Select a location.
3
Select the location information at the top of the screen.
4
Select >
Delete Location
> .
Courses
You can send a course from your Garmin Connect account to
your device. After it is saved to your device, you can navigate
Navigation
3