Garmin eTrex 20 Quick Start Manual

Other manuals for eTrex 20: Owner's Manual, Owner's Manual
Manual is about: Navigation system Garmin

Summary of eTrex 20

  • Page 1

    Etrex ® quick start manual for use with models 20 and 30

  • Page 2: Getting Started

    2 etrex20/30quickstartmanual getting started ‹ warning see the important safety and product information guide in the product box for product warnings and other important information. When using your device the first time, you should complete these tasks to set up the device and get to know the basic...

  • Page 3: Battery Information

    Etrex20/30quickstartmanual 3 ➏ ➒ ➑ ➐ ➏ mini-usb port (under weather cap) ➐ battery cover ➑ battery cover locking ring ➒ mounting spine battery information ‹ warning the temperature rating for the device (-4°f to 158°f, or -20°c to 70°c) may exceed the usable range of some batteries. Alkaline batteri...

  • Page 4: Type.

    4 etrex20/30quickstartmanual 2. Insert the batteries, observing polarity. 3. Replace the battery cover, and turn the d-ring clockwise. 4. Hold ( page 2 ). 5. Select setup > system > battery type. 6. Select alkaline, lithium, or rechargeable nimh. Turning the device on or off hold ( page 2 ). Registe...

  • Page 5: Calibrating The Compass

    Etrex20/30quickstartmanual 5 can significantly reduce battery life. 1. While the device is on, press . 2. Move the thumb stick left and right to adjust the brightness level. Calibrating the compass notice calibrate the electronic compass outdoors. To improve heading accuracy, do not stand near objec...

  • Page 6: Creating A Waypoint

    6 etrex20/30quickstartmanual creating a waypoint you can save your current location as a waypoint. 1. Select mark waypoint. 2. Select an option: • to save the waypoint without changes, select done. • to make changes to the waypoint, select an attribute, make changes to the attribute, and select done...

  • Page 7: 1.  Select Where To?.

    Etrex20/30quickstartmanual 7 1. Select where to?. 2. Select all pois. 3. Enter the name or part of the name. 4. Select done. Creating a route a route is a sequence of waypoints that leads you to your final destination. 1. Select route planner > create route > select first point. 2. Select a category...

  • Page 8: Note: Using The Most Often

    8 etrex20/30quickstartmanual 6. Complete an action: • select an option to record tracks more or less often. Note: using the most often interval provides the most track detail, but fills up the device memory quicker. • enter a time or distance, and select done. As you move with the device turned on, ...

  • Page 9: 2.  Select Compass.

    Etrex20/30quickstartmanual 9 when navigating to a destination, the bearing pointer points to your destination, regardless of the direction you are moving. 1. Begin navigation to a destination ( page 8 ). 2. Select compass. 3. Turn until points toward the top of the compass, and continue moving in th...

  • Page 10: Getting The Manuals From The

    10 etrex20/30quickstartmanual getting the manuals from the device 1. Connect your device to a computer ( page 9 ). 2. Pull up the weather cap from the mini-usb port. 3. Plug the small end of the usb cable into the mini-usb port. 4. Open the “garmin” drive or volume. 5. Open the garmin\documents fold...

  • Page 12

    © 2011 garmin ltd. Or its subsidiaries garmin international, inc.,1200 east 151 st street, olathe, kansas 66062, usa garmin (europe) ltd. Liberty house, hounsdown business park, southampton, hampshire, so40 9lr uk garmin corporation no. 68, zhangshu 2 nd road, xizhi dist., new taipei city, 221, taiw...