Garmin eTrex eTrex Owner's Manual - Routes Page
eTrex H Owner’s Manual
M
aIn
M
enu
To project a waypoint:
1.SelectawaypointontheWaypointpage>
ENTER.
2.Select
PROJECT>ENTER.Anumericnameis
assignedtothenewwaypoint.
3.Distanceisselectedbydefault.Press
ENTER.
4.WiththeEditNumberpageopen,press
DOWN
tomovethehighlighttothenextnumberinthe
field. With the preferred digit selected >
ENTER
toactivatethedropdownnumberlist.
5.Selectthecorrectnumber>
ENTER.Whenall
numbersareentered,highlight
OK>ENTER.
6.WiththeProjectWaypointpageopen,press
DOWN to highlight the bearing field > ENTER
toviewtheEditAnglepage.
7.Press
DOWNtomovethehighlighttothenext
number in the field. With the preferred digit
selected,press
ENTERtoactivatethedrop
downnumberlist.
8.Selectthecorrectnumber>
ENTER.Whenall
numbersareenteredcorrectly,highlight
OK>
ENTER.
9.Thename,symbol,andelevationcanbe
changedonthispageaswell.Whenall
changeshavebeenmade,select
OK>
ENTERtosavethewaypoint.SelectGOTOto
savethewaypointandbegindirectnavigation
tothepoint.
Routes Page
Navigate using one of three methods: GOTO
TracBack, and Routes.
The Routes feature guides you from the first waypoint
in the route to each successive waypoint to your final
destination.
The Routes feature and the GOTO feature both guide
you to destination waypoints. However, the Routes
feature is more useful for navigating to multiple
points along a path. When you reach one waypoint,
you are directed to the next waypoint on the route.
To create a route, select waypoints from the waypoint
list and place them into a route in the sequence that
you want to navigate to them. You need at least two
waypoints (up to a maximum of 125) linked together