Garmin GMI 10 Digital Marine Instrument Display Installation Instructions Manual
GMI 10 Installation Instructions
To obtain the best possible performance, install your GMI 10 Marine Instrument according to the following instructions.
If you experience difficulty during the installation, contact Garmin Product Support, or seek the advice of a professional
installer.
The GMI 10 will communicate with NMEA 2000- or NMEA 0183-compatible sensors and devices, and can show
information such as speed, heading, water depth, and fuel information when connected to the appropriate sensors.
WARNING: See the Important Safety and Product Information guide in the product box for product warnings and
other important information.
Product Registration
Help us better support you by completing our online registration at
.
For future reference, write down the serial number assigned to your GMI 10 in the space provided below. The serial
number is located on a sticker on the back of the GMI 10.
Serial number
Contact Garmin
Contact Garmin if you have any questions while installing or using your GMI 10. In the USA contact Garmin Product
Support by phone: (913) 397-8200 or (800) 800-1020; or go to
In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the UK).
Packing List and Accessories
Before installing your GMI 10, confirm that your package includes the following items. If any parts are missing, contact
your Garmin dealer immediately.
Standard Package
GMI 10 unit
Protective cover
Flush mount hardware
Power/data wiring harness
2 NMEA 2000 T-connectors
2 NMEA 2000 terminators (1 male, 1 female)
1 NMEA 2000 drop cable (2 m)
1 NMEA 2000 power cable (2m), (3 A fuse)
Installation instructions
•
•
•
•
•
•
•
•
•
Optional Accessories
Additional NMEA 2000 network components
Tools Needed
Jigsaw or 3
17
/
32
in. (90mm) hole saw,
Drill and drill bits
Center punch and hammer
Scissors
File and sandpaper
Phillips head screwdriver
Anti-seize lubricant (optional)
•
•
•
•
•
•
•
•
To install and use your GMI 10
1. Select a location.
2. Flush mount the GMI 10.
3. Connect the GMI 10 to power.
4. Connect the GMI 10 to sensors.
January, 2008
190-00892-02 Rev. B
Printed in Taiwan