Gmr 20/40 marine radar installation guide.
Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of garmin. Garmin hereby grants permission to download a single copy of this manual ...
1 gmr 20/40 radar installation manual serial number: w elcome thank you for choosing the garmin gmr 20/40. The gmr 20/40 utilizes the performance of garmin radar and provides overlay and color information when combined with a marine multi-function display (mfd). Contact garmin if you should encounte...
2 gmr 20/40 radar installation manual scanner installation the following section covers the installation and setup of the gmr 20 (2 kw) and gmr 40 (4 kw) marine radars. The gmr 20 and 40 only operate with components of the garmin marine network with compatible mfd (mulit-function displays). See your...
3 gmr 20/40 radar installation manual mounting the scanner 1. Once a suitable mounting location has been determined, verify that the mounting hole locations are aligned fore and aft, then drill four 9.5 mm (0.37”) mounting holes referencing figure 1 below. (this step is not necessary if you are usin...
4 gmr 20/40 radar installation manual final wiring connections once the scanner is installed and the cable routed, you are ready to connect the power and marine network. 1. Connect the black ground (-) wire to the vessel’s negative power terminal. 2. Connect the power (+) wire (with fuse holder) to ...
5 gmr 20/40 radar installation manual powering on the system once successfully installed the scanner is ready to be powered on. 1. On the mfd (multi-function display), press the red power button. This will automatically power on the scanner. The welcome page appears showing the gmr 20 or 40 as a det...
6 gmr 20/40 radar installation manual specifications unit dimensions: 28” (710 mm) d x 8” (205 mm) h. Radar scanner weight: unit 26 lbs; cable 8.35 lbs range scales (range rings): gmr 40 — 1/8nm (1/32nm) to 36nm (9nm) gmr 20 — 1/8nm (1/32nm) to 24nm (6nm) power output: gmr 20: 2 kw / gmr 40: 4kw powe...
7 gmr 20/40 radar installation manual towards bow towards stern 28” (710.0 mm) 8.40” (213.5 mm) 5.57” (141.5 mm) 13.97” (355.0 mm) 8” (205.4 mm) 9.17” (233.0 mm).
8 gmr 20/40 radar installation manual warning and cautions caution: use the gmr 20/40 at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this owner’s manual, and thoroughly practice operation using the simulator mode prior to actual use. When in ...
9 gmr 20/40 radar installation manual software license agreement by using the gmr 20/40, you agree to be bound by the terms and conditions of the following software license agreement. Please read this agreement carefully. Garmin grants you a limited license to use the software embedded in this devic...
10 gmr 20/40 radar installation manual issued: 19/04/2004 revised: 19/04/2004 page: 1 of 1 declaration of conformity application of council directive: 1995/5/ ec standard to which conformity is declared: en 60945: 1997 marine navigational equipment – general requirements manufactured by: garmin inte...
© copyright 2004 garmin ltd. Or its subsidiaries garmin international, inc. 1200 e 151st street, olathe, kansas 66062 u.S.A. Tel. 913/397.8200 fax. 913/397.8282 garmin (europe) ltd. Unit 5, the quadrangle, abbey park industrial estate, romsey, so51 9aq u.K. Tel. 44/0870.8501241 fax. 44/0870.8501251 ...
