1. DL manuals
  2. Garmin
  3. Marine GPS System
  4. GPS 17 Series
  5. Installation Instructions Manual

Garmin GPS 17 Series Installation Instructions Manual

Manual is about: Technical Specifications

Summary of GPS 17 Series

  • Page 1

    Gpsmap ® 3005c & gps 17 installation instructions.

  • Page 2

    All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded, or stored in any storage medium, for any purpose without the express prior written consent of garmin. Garmin hereby grants permission to download a singl...

  • Page 3

    1 gpsmap 3005c & gps 17 i nstallation i nstructions i ntroduction the gpsmap 3005c multi-function display (mfd) and gps 17 must be properly installed according to the following instructions for the best possible performance. To complete the installation, you need the appropriate fasteners, tools, an...

  • Page 4

    2 gpsmap 3005c & gps 17 i nstallation i nstructions i nstallation i nstructions surface mounting the gpsmap 3005c tools • drill and drill bit • screwdriver • pencil • mounting hardware (not included) note: mounting hardware (fasteners) not included. Mounting holes are 5/16" (7.9 mm) in diameter. To ...

  • Page 5

    3 gpsmap 3005c & gps 17 i nstallation i nstructions flush mounting the gpsmap 3005c tools • flush mount template • jig saw • masking tape • scissors • drill • drill bits—1/8" (3 mm) and 3/8" (6 mm) • 1/16" (2 mm) allen (hex) wrench • sockets • hammer • center punch to flush mount the gpsmap 3005c: 1....

  • Page 6

    4 gpsmap 3005c & gps 17 i nstallation i nstructions installing the gps 17 the gps 17 can be flush mounted or installed on any standard 1" o.D. (outer dimension), 14 threads-per-inch marine mount. When mounting the gps 17, the cable can be run externally, through the mounting panel, or through the cen...

  • Page 7

    5 gpsmap 3005c & gps 17 i nstallation i nstructions to attach the enclosed pole mount to the gps 17: 1. Thread the cable though the pole mount. 2. Align the tab on the mount to the notch on the gps 17. 3. Use the enclosed screws to secure the mount to the base. Attaching the pole mount to the gps 17...

  • Page 8

    6 gpsmap 3005c & gps 17 i nstallation i nstructions wiring and cables the gpsmap 3005c comes with an 18-pin power/data cable. Optional garmin marine network components use specialized garmin network cables. For some installations, it may be necessary to drill 1.25" (31.7 mm) holes to route the conne...

  • Page 9

    7 gpsmap 3005c & gps 17 i nstallation i nstructions power/data cable wiring the following pages contain several wiring diagrams. The first diagram on the next page is a simple diagram showing the gpsmap 3005c mfd using the 18-pin power/data wiring harness and the gps 17. If two or more gpsmap 3005c/3...

  • Page 10

    8 gpsmap 3005c & gps 17 i nstallation i nstructions + - battery 10-35volts dc wire color nmea device with sonar output/ vhf radio with dsc ground nmeatx/rx - power nmea rx + black red white/blue (port 2) white/brown (port 2) garmin gpsmap 3005c nmeatx + wire type 2 a fuse blue (port 1) brown (port 1...

  • Page 11

    9 gpsmap 3005c & gps 17 i nstallation i nstructions optional alarm wiring the gpsmap 3005c has an alarm circuit that can be used with a lamp, a horn, or both to alert you when the unit displays a message. The alarm circuit pulls low when the alarm sounds. The alarm does not have to be wired for the ...

  • Page 12

    10 gpsmap 3005c & gps 17 i nstallation i nstructions garmin marine network the garmin marine network is a waterproof ethernet-based system that allows multi-function displays (mfd) to communicate with sensors and other mfds over the network. Waterproof rj-45 connections allow for simple installation...

  • Page 13

    11 gpsmap 3005c & gps 17 i nstallation i nstructions the following diagram shows the garmin marine network with a gsd 22 sounder module connected. Note: power connections for network components are not shown in the following illustration. Garmin gpsmap 3006c/3010c mfd garmin gdl 30/30a marine weathe...

  • Page 14

    12 gpsmap 3005c & gps 17 i nstallation i nstructions final wiring connection after all the wiring is complete, the cables are attached on the backside of the gpsmap 3005c mfd. If the mfd is not being networked, firmly affix the weather cap over the open connector to limit corrosion of the contacts. Th...

  • Page 15

    13 gpsmap 3005c & gps 17 i nstallation i nstructions drill this 3/4" (19 mm) hole if the coax is going to be installed through the mounting panel. Drill using a 11/64" (4.5 mm) drill bit flush mount drilling template.

  • Page 16

    © copyright 2004-2006 garmin ltd. Or its subsidiaries garmin international, inc. 1200 east 151 st street, olathe, kansas 66062, u.S.A. Garmin (europe) ltd. Unit 5, the quadrangle, abbey park industrial estate, romsey, so51 9dl, u.K. Garmin corporation no. 68, jangshu 2 nd road, shijr, taipei county,...