1. DL manuals
  2. Garmin
  3. Marine GPS System
  4. GPS 17 Series
  5. Installation Instructions Manual

Garmin GPS 17 Series Installation Instructions Manual

Manual is about: Technical Specifications

Summary of GPS 17 Series

  • Page 1

    Gpsmap ® 3006c/3010c & gps 17 installation instructions.

  • Page 2

    All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded, or stored in any storage medium, for any purpose without the express prior written consent of garmin. Garmin hereby grants permission to download a singl...

  • Page 3

    1 gpsmap 3006c/3010c & gps 17 i ntroduction the gpsmap 3006c/3010c multi-function display (mfd) and gps 17 must be properly installed according to the following instructions for the best possible performance. To complete the installation, you need the appropriate fasteners, tools, and mounts listed ...

  • Page 4

    2 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions i nstallation i nstructions surface mounting the gpsmap 3006c/3010c tools • drill and drill bit • screwdriver • pencil • mounting hardware (not included) note: mounting hardware (fasteners) not included. Mounting holes are 5/16" (7.9 mm) in d...

  • Page 5

    3 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions flush mounting the gpsmap 3006c/3010c tools • flush mount template • jig saw • masking tape • scissors • drill • drill bits—1/8" (3 mm) and 3/8" (6 mm) • 1/16" (2 mm) allen (hex) wrench • sockets or wrenches • hammer • center punch to flush mo...

  • Page 6

    4 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions installing the gps 17 the gps 17 can be flush mounted or installed on any standard 1" o.D. (outer dimension), 14 threads-per-inch marine mount. When mounting the gps 17, the cable can be run externally, through the mounting panel, or through t...

  • Page 7

    5 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions to attach the enclosed pole mount to the gps 17: 1. Thread the cable though the pole mount. 2. Align the tab on the mount to the notch on the gps 17. 3. Use the enclosed screws to secure the mount to the base. Attaching the pole mount to the ...

  • Page 8

    6 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions split use this hole (no trim) for the power/data, marine network, or gps 17 cable trim out to this line for the marine video cable wiring and cables the gpsmap 3006c/3010c comes with an 18-pin power/nmea and a 17-pin marine video cable. Optio...

  • Page 9

    7 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions power/data cable wiring the following pages contain several wiring diagrams. The first diagram on the next page shows the gpsmap 3006c/3010c mfd using the 18-pin power/data wiring harness and the gps 17. If two or more gpsmap 3006c/3010c units...

  • Page 10: �

    8 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions ...

  • Page 11

    9 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions optional alarm wiring the gpsmap 3006c/3010c has an alarm circuit that can be used with a lamp, a horn, or both to alert you when the unit displays a message. The alarm circuit pulls low when the alarm sounds. The alarm does not have to be wi...

  • Page 12

    10 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions marine video cable the gpsmap 3006c/3010c marine video 17-pin cable allows input of ntsc (national television system committee)/pal (phase alternate line) composite video sources, and vga resolution pc monitor output. Marine video inputs are...

  • Page 13

    11 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions garmin marine network the garmin marine network is a waterproof ethernet-based system that allows multi-function displays (mfd) to communicate with sensors and other mfds over the network. Waterproof rj-45 connections allow for simple instal...

  • Page 14

    12 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions the following diagram shows the garmin marine network with a gsd sounder module connected. Note: power connections for network components are not shown in the following illustrations. Garmin gpsmap 3006c/3010c mfd garmin gdl 30/30a marine we...

  • Page 15

    13 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions final wiring connection after all the wiring is complete, the cables are attached on the back of the gpsmap 3006c/3010c mfd. If the mfd is not being networked, be sure to firmly affix the weather cap over the open connector to limit corrosion ...

  • Page 16

    14 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions.

  • Page 17

    15 gpsmap 3006c/3010c & gps 17 i nstallation i nstructions drill this 3/4" (19 mm) hole if the coax is going to be installed through the mounting panel. Drill using a 11/64" (4.5 mm) drill bit flush mount drilling template.

  • Page 18

    © copyright 2004, 2005, 2006 garmin ltd. Or its subsidiaries garmin international, inc. 1200 east 151 st street, olathe, kansas 66062, u.S.A. Garmin (europe) ltd. Unit 5, the quadrangle, abbey park industrial estate, romsey, so51 9dl, u.K. Garmin corporation no. 68, jangshu 2 nd road, shijr, taipei ...