Garmin MX20 Installation Manual - 3 Specifications
Specifications
MX20 Installation Manual
45
3 Specifications
This section includes detailed electrical, physical, environmental, and performance specifications for the MX20.
3.1 MX20 Features
3.1.1 Display
6" Diagonal, Color AMLCD Display
640x480 Resolution (921,600 RGB Dots)
65,535 Simultaneous Colors
Direct Sunlight Readable
Auto/Manual Dimming
3.1.2 User Interface
Back-lit, high tactile buttons
Six general purpose "line select keys"
Four general purpose "smart keys"
Dedicated Function and Menu/Enter keys
Front Panel Data-Card Access
Open Software Architecture
Field-Upgradeable Code
3.1.3 Expansion/Internal Architecture
Open software architecture
Field-Upgradeable software
PC-104/PC-104L expansion bus
Four external high-speed serial I/O ports
Four general purpose input flags
3.1.4 Position Source
Primary - External GPS or Loran via RS-232 serial input
Optional internal GPS
3.1.5 Electrical
Table 3-1. Unit Power Loads
14 VDC
28 VDC
Unit
Typical Max Typical Max
MX20
2.0 A
3.0 A
1 A
1.5 A
MX20 with heater
(1)
3.0 A
4.0 A
1.5 A
2.0 A
MX20 I/O
2.5 A
3.5 A
1.25 A
1.75 A
MX20 I/O with heater
(1)
3.5 A
4.5 A
1.75 A
2.25 A
Notes:
(1)
Heater element turns on below approximately 30
o
C. MX20 with pushbutton power/brightness control does not
have a heater.
Note: Circuits should be protected in accordance with guidelines in AC 43.13-1B, chapter 11, section 2,
paragraph 429. Power inputs should be across a minimum of all four specified input pins.