Garmin NTX54-Nissan User Manual - page 9
9 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for misuse of its product.
If you do not agree, please discontinue use immediately and return product to place of purchase. This product is intended for off-road use and passenger
entertainment only.
Installation of the T-harnesses for all vehicles
1. Plug the female end of the 24 pin Video T-Harness into the factory male 24 pin plug behind the radio.
2. Plug the female end of the 20 pin Power T-harness into the factory male 20 pin plug behind the radio.
3. Run both the extension harnesses with the 22 pin and 18 pin black mini Molex ends to a location near the radio
with enough room to properly house and mount the NTX-NIS/INF integration module.
4. If installing a video source, or a front or camera, continue with instruction 5. If no camera or video source is being
installed skip to instruction 8.
Labeled ‘To
Radio Only’