1 goldmund srp2.3 preamplifier.
2 goldmund srp2.3 preamplifier user manual attention : no connection or manipulation must be done before reading these instructions. Damage to the preamplifier may result if the following instructions are not consciously understood and applied..
3 1 - unpacking you will find in the goldmund srp2.3 box : - the preamplifier. - the remote controller - the power cord. - this manual. - accessories and spare fuses. Please keep the packaging in case you need to transport the preamplifier at a later date or if you have to send it for maintenance. 2...
4 4 - connections connect the power cord to the back of the unit and plug it into the nearest wall plug. Use a 3 lugs grounded plug for safety. To get the best sound of the preamplifier, avoid any multiple plugs or an extension cord. Connect the interconnects between the preamp and the power amp. Pl...
5 - remote-control the srp2.3 uses a volume motor-driven potentiometer which can be adjusted by the remote controller provided for increasing (+) or decreasing (-) the sound level. In addition a "muting" control with soft stop and start is available through the remote control which acts on the poten...
6 technical data output level - nominal level : 0.63 v rms. - maximum output level : 3 v rms. - output stage output impedance : - corrected output impedance # 330 ohms. Frequency response these values for any level to 17 v rms. - +/- 0.1 db, 10 hz - 100 khz. - +/- 1 db, 6 hz - 300 khz. - +/- 3 db, 3...
7 front panel controls - volume control. - selector switch. Rear panel connectors and controls - ac line connector 3 lugs. - output and input connectors rca (right and left), 3 digital optional inputs rca. Size and weight - 44 cm w x 30 cm d x 6 cm h. - weight : 4 kg. Warranty - 3 years parts and la...
