Goldtop SX User Manual - page 8
Settings
6
c) Abort the channel search
At any time, to abort the channel search, press the RED key. The
channels that have been found will be lost.
d) Save the channels
At the end of the search the system will go back to the «Channel
search» menu. To go back to the main menu, press Exit.
•
To save the search results, press the GREEN key.
2.2 Automatic search
The automatic search finds the channels of all the transponders of the
selected satellite.
•
From the «Channel search» menu select the second entry,
«Automatic search», and press OK.
You need to input four parameters.
a) Parameters setting
1. Satellite: is the satellite transmitting the channel. If you have
a multifeed system you can select the satellite by pressing
the t u keys.
2. FTA (Free-To-air) only: select “yes” or “no” with the t u
keys, whether or not you want the restrict the search to the
non-pay channels.
3. Keep existing: select “yes” or “no” with the t u keys,
whether you want to append the new channels to the current
list, or you want to have only the new channels found.
4. Channel Type: with the p q keys you can search for TV
channels only, Radio channels only, Interactive channels,
only or a combination of these three kind of channels.
b) Start the channel search
Once the parameters are set, press the Green key to start the search. A
window will appear with the status of the search. At the end of the search
the system will go back to the «Channel search» menu.
c) Abort the channel search
At any time, to abort the channel search, press the RED key. The
channels that have been found will be lost.
d) Save the channels
At the end of the search the system will go back to the «Channel
search» menu. To go back to the main menu, press Exit.
•
To save the search results, press the GREEN key.
If you don’t want to do a channel search, press Exit to go back to the
main menu.