Goldtop SX User Manual - page 9
Settings
[
Edizione del 23/08/2002
]
7
3. Channel lists management.
You can edit the lists of the stored Radio and TV channels, change the
channels position or remove them definitively. Also, you can create up to
8 lists of favourite TV channels and 8 lists of favourite Radio channels.
Default settings come with four thematic lists. Each favourite list can be
edited and renamed.
To do this, select «Edit lists» from main menu and press OK.
Next menu presents four entries:
1. «Edit TV channels», to enter the complete list of TV channels.
2. «Edit radio channels», to enter the complete list of radio
channels.
3. «Edit TV favourites», to enter the favourite TV channels lists.
4. «Edit radio favourites», to enter the favourite radio channels
lists.
Select one entry and press OK.
Managing functions are the same for TV and radio channels.
a) Edit the complete channels lists
By choosing the first entry - or the second - you can edit the complete list
of TV - or radio - channels stored in memory. Changes to this list will be
reflected to memory, if, when exiting the main menu, you’ll choose to
save settings. In particular, channels removed from list will be deleted
from memory, and, in order to get them again, you’ll have to do a new
channel search.
From here, you can rename the channels.
a.1) List scrolling
Often, a list contains more channels than it can show at the same time in
its window. There are two way for scrolling a list:
•
With the
p q keys you move through the channels shown into
the window. Once you reach an extremity, a further key pressure
will show the next page into the window.
•
With the t u keys you can directly go to the next or the
previous page.
a.2) Change position of one or more channels
•
With the
p q keys, select the channel you want to move and
press OK. The channel name color becomes yellow and the low
side of the screen shows «Selected channels:1». To move more
than one channel at once, select the first channel, then select
the last channel you want to move, and keep pressed OK for two
seconds.
•
With the p q keys, go to the channel, above which you want to
paste the selected channel(s).
•
Press the GREEN key.