H-P Products Prestige Pro Owner's Manual - Performance Features
PRESTIGE PRO POWERHEAD
6
PERFORMANCE FEATURES
Warning Indicator Light
Your powerhead is equipped with a circuit protector safety system that protects
it from a possible jammed brush roller. The warning indicator light on top of the
unit will change from green to red should a jam occur.
If the circuit protector trips:
1. Turn your system OFF and unplug the Prestige Pro powerhead.
2. Remove the object preventing the brush roller from turning.
3. Locate the circuit protector reset button on the back right of the
powerhead to reset the circuit protector. When the unit is turned back
ON, the warning indicator light should be green.
If the circuit protector trips again, repeat these steps.
If this does not correct the issue, please contact your
authorized service dealer for further assistance.
PRESTIGE PRO ATTACHMENTS
Hose Handle Attachments- Using the Hose with Other
Attachments
If the Prestige Pro powerhead is attached to the wand, turn the
system OFF before removing the hose handle from the wand.
To disconnect the hose from the wand:
1. Press the black handle release button, then pull on the
hose handle to disconnect from the wand.
2. Slide attachments firmly on handle as needed.
Wand Assembly Attachments
To remove the powerhead from the wand:
1. Raise the wand to a vertical position so that it
“clicks” into a locked position.
2. Press wand release pedal with your foot and pull
the wand straight up and out of the Prestige Pro
powerhead.
3. Put desired attachments on wand as needed.
Handle
Release
Button
Wand
Release
Pedal