HAI OmniTouch 10 pe User Manual - Note:
Manual is about: 10” Portable Color Touchscreen
of
40
6
About the Optional Docking Cradle
The optional 94A01-1 OmniTouch 10pe Docking Cradle is used to secure the OmniTouch 10pe in an
upright position, while providing power to the unit, charging the battery, and connecting accessories.
When the optional 94A01-1 Docking Cradle is used, the OmniTouch 10pe Touchscreen should be
placed in the cradle while it’s not in use.
Note:
When inserting the OmniTouch 10pe into the docking cradle, push down firmly. The power LED
on the OmniTouch 10pe will blink green when the battery is charging.
To charge the external battery, attach the battery to the docking stand as shown below.
The external battery can also be charged
when installed on the OmniTouch 10pe.