HAI OmniTouch 10 pe User Manual - Connecting The Power
11
Connecting the Power
Before using the OmniTouch 10pe for the first time, you must fully charge the battery using the supplied
AC adapter or the optional Docking Cradle.
Connect the power adapter as shown and leave to charge for:
• a minimum of 4 hours when using the internal battery
• a minimum of 8 hours when a second battery is installed
Charging the Battery Using the AC Adapter
1. Plug the AC adapter cable into the Power jack on the OmniTouch 10pe.
2. Plug the power cable connector into the AC adapter.
3. Plug the AC adapter into an electrical outlet.
Charging the Battery with the Optional Docking Station
1. Plug the AC adapter cable into the power jack on the optional docking station.
2. Plug the power cable connector into the AC adapter
3. Plug the AC adapter into an electrical outlet.