Haier 10515222 Operation Manual - page 11
Then Select Auto operation
LOW
MED
HI
AUTO
Operation
About Auto Operation
Under the mode of auto operation, air conditioner will
automatically select Cool, Dry or Fan operation according
to room temperature.
5.Unit stop
Press ON/OFF button, the unit stops.
1. Unit start
Press ON/OFF on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
o
C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1
o
C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
3.Select temp.setting
Air conditioner is running under displayed fan speed.
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
Display board
Remote controller
AUTO
COOL
DRY
FAN
Auto Operation
POWER/SOFT
FRESH
PURIFY
9