Haier 10515222 Operation Manual - page 17

BLANK

TIMER ON

TIMER OFF

TIMER ON-OFF

Then select your desired TIMER mode (TIMER ON or

TIMER OFF). "        "or "       "will flash.

Press HOUR                button.

    Every time the button is pressed, time setting

    increases 1 min, if kept depressed, it will increase

    rapidly.

    Every time the button is pressed, time setting

    decreases 1 min, if kept depressed, it will decrease

    rapidly.

    It can be adjusted within 24 hours.

After setting correct time, press SET button to confirm

"        "or"       "on the remote controller stops flashing.

Time displayed: Unit starts or stops at x hour x min.

(TIMER ON or TIMER OFF).

Operation

Timer On/Off Operation

 Hints:

 After replacing batteries or a power failure happens, time setting should be reset.

 Remote controller possesses memory function, when use TIMER mode next time,

 just press SET button after mode selecting if time setting is the same as previous one.

Set clock correctly before starting TIMER operation.

1. After unit starts, select your desired operation mode

    Operation mode will be displayed on LCD.

2. Timer mode selection

    Press TIMER button to change TIMER mode. Every

    time the button is pressed, display changes as follows:

    Remote controller:

3.Time setting

4.Confirming your setting

5.Cancel TIMER mode

Just press TIMER button several times until TIMER

mode disappears.

Display board

Remote Controller

POWER/SOFT

FRESH

15