Haier AP88NACBEA Operation Manual - Operation Instruction
OFF
ON
OFF
ON
AM
PM
AM
PM
TIMER ON TIMER OFF TIMER ON-OFF
Blank
ON
Then choose the TIMER ON-OFF mode.
At this time the" "will flash.
*
*
At this time, the" "will not flash.
OFF
MODE
FAN
SWING
TEMP
CLOCK
TIMER
SET
SLEEP
HEAT FILTER RESET
ROOM
RESET
ON/OFF
Operation instruction
Timer On-Off function
Cancel TIMER
Press the TIMER button several times until the TIMER mode display disappears.
According to the sequence of TIMER ON & TIMER OFF setting, you can realize
turning on unit first, then turning off unit.
After adjusting time, press SET button to confirm time.
The time displayed is: at x oíclock x minutes the unit will be turned on.
At this time, the" "will not flash ," "begins to flash.
5.Set the TIMER OFF time
Press the TIME button, the adjustment method is the same as the one of setting
TIMER ON time.
6.Confirm the time of TIMER OFF
After adjusting time, press SET button to confirm time.
The time displayed is: at x oíclock x minutes the unit will be turned off.
ON
OFF
2.Set of TIMER mode
Press the TIMER button to change the TIMER
mode, each press the TIMER mode will change
as the following sequence:
1.Turn on the unit
After turning on the unit, set the desired
working mode.
The LCD of the wire controller will show
working mode. (except for Timer, Sleep, Swing)
Each press, the set time increases 10 minutes. If depress the button, the time will
increase rapidly.
Each press, the set time decreases 10 minutes. If depress the button, the time will
decrease rapidly.
3.Set time
Press the time adjusting button
This LCD will show the time set, the time can be adjusted within 24h.
(AM stands for morning, PM stands for afternoon).
4.Confirm the time
10