Haier AP88NACBEA Operation Manual - Operation Instruction
l
Note:
l
l
l
l
MODE
FAN
SWING
TEMP
CLOCK
TIMER
SET
SLEEP
HEAT
FILTER RESET
SET
RESET
ON/OFF
Operation instruction
Sleep operation
Use of SLEEP function
After turning on the unit, setting the working mode, then press SLEEP button to
make the air conditioner have the previous Sleep time (powered on for the first time
or after performing Sleep is 1h). The Sleep symbol will appear. Press time
*/*
button, you can choose between 1~8h. Each press, it may increase/decrease 1h and
will display in the humidity area with ì xhî , and display ì Timer Offî in Timer Off
area and the time to turn off; press Sleep button again to cancel Sleep function. The
Sleep symbol disappears.
Before going to bed, you can press the SLEEP button, the air conditioner will operate
in comfort sleep mode to make you have a sound sleep.
Before using this function, you
should calibrate the clock first, otherwise, the SLEEP function will be out of order.
2.In HEATING operation
1 hour later in SLEEP operation, the temperature
will decrease 2
* from the set temperature, another
1 hour later increase another 2
*, then the unit will
operate continuous at this temperature for 3 hours,
then it increases 1
*, after operating at this
temperature for another 3 hours, the unit will turn
off automatically. The temperature is lower than set
temperature to prevent you from feeling
uncomfortable during sleep.
3.In AUTO operation
The air conditioner will perform the relative SLEEP operation
according to automatically chosen operation mode.
4.In FAN operation
Cannot use SLEEP function
Operation modes
1.In COOLING, DEHUMIDIFYING operation
1 hour later in SLEEP operation, the temperature
will increase 1
* from the set temperature, another
1 hour later increase another 1
*, then the unit will
operate continuous for 6 hours, then it turns off
automatically. The temperature is higher than set
temperature to prevent you from getting a cold.
After setting Sleep function, it is not permitted to adjust clock.
The Sleep time is less than 8h, after reaching the set time, the unit will automatically stop.
Set Sleep function after setting ì Timer Offî function, the air conditioner will perform Sleep
function.
After setting Sleep function, the Timer function cannot be set.
Set Sleep function after setting ì Timer Onî function, the Sleep function can only be set
in the set time of Timer On.
in COOLING
* DEHUMIDIFYING operation
Set temperature
SLEEP operation starts
SLEEP operation stops
turn off
1 hour
about 6 hours
increase 1
*
1 hour
increase 1
*
Set temperature
SLEEP operation starts
SLEEP operation stops
turn off
1 hour
about 3 hours
3 hours
decrease 2
*
increase 1
*
in HEATING operation
1 hour
decrease 2
*
8