Haier HD90-A636-F Instructions Manual - page 10
10 | English
CONTROL PANEL
1
2
Filters must be cleaned regularly.
See Lint Filter Cleaning or Condenser
Condenser
Filter Cleaning section of the manual.
2
8
4
6
3
5
1
7
Clean filter
indicator
Empty tank
indicator
Water tank must be emptied.
Important: Empty the water tank after each
drying cycle. See Empty the water tank section
of the manual.
The display shows the remaining time, the delay
time and other related information.
Display
4
Temp
Dry Level
Intense
Delay
Start/Pause
Extra rinse
Bedding
Refresh
Timer
Ready to
Iron
Heat
Pump
HD90-A636-F
10
11
12
3
Child-lock indicator
To activate the Child-lock function after a cycle
has been started, press the Temp & Delay
buttons for 3 sec. until the indicator icon lights up.
To deactivate press both buttons for 3 sec. again.
To deactivate press both buttons for 3 sec. again.
& Delay
Note: When the cycle ends or the power
supply is interrupted, the function will not be
cancelled automatically.
Note: The remaining time is a default value,
this time will be re-calculated depending on
additional program settings and the moisture
content of the laundry.
Note: After each cycle, indicator will flash to
remind cleaning the filters.