Haier HD90-A636-F Instructions Manual - page 11
English | 11
5 Program knob
Select one of the 16 programs using the knob.
The indictor of the respective program lights up.
See Program Modes section of the manual for
further information.
6
Power button
Press Power button to switch on/off the tumble
dryer.
7 Temp button
Press the button to set the drying temperature for
some programs.
High temperature.
Middle temperature.
Low temperature.
Cool air.
8 Dry level button
Press the button to set the final moisture content
of the laundry at the end of cycle.
Ready to iron.
Extra dry.
Ready to store.
When the programme starts, after a few minutes
the display will show AUto. This means the
automatic load detection is in progress. Sensors
are detecting and estimating the selected
programme time to finish. Depending on the
programme selected, load quantity, humidity and
ambient temperature, the AUTO load detection
phase can last a few minutes for small load, or up
to hour for the maximum load or large items,
before displaying the approximate programme
time remaining to finish the programme.
AUTO load detection
system
Delay function for delay start, press the button to
set time (in 1 intervals up to 19 hours).
The appliance shoule be finished in, afterwards
press to start the delayed operation.
9 Delay button