Haier L32A9-AKF Owner's Manual - Choose Your Connection

ANT. IN

S-VIDEO IN

L  AUDIO  R      

AV OUT  

L  AUDIO  R      

AV IN  

VIDEO

External Equipment Connections

NOTE: All cables shown are not included with the TV.

Choose Your Connection

There are several ways to connect your television, depending on the components you 

want to connect and the quality of the signal you want to achieve. The following are 

examples of some ways to connect your TV. 

Choose the connection which is best for you.

VCR Connection

Connection Option 1

Set VCR output switch to channel 3 or 4 and

then tune the TV to the same channel number.

Connection Option 2

1

. Connect the audio and video cables from the

VCR's output jacks to the TV input jacks, as

shown in the figure.

When connecting the TV to VCR, match the

jack colors (Video = yellow, Audio Left = white,

and Audio Right = red).

If you connect an S-VIDEO output from VCR to

the S-VIDEO input, the picture quality is

improved; compared to connecting a regular

VCR to the Video input.

2

. Insert a video tape into the VCR and press

PLAY on the VCR. (Refer to the VCR owner`s

manual.)

3

. Select the input source with using the

INPUTbutton on the remote control, and 

then press CH+/- button to select the source,

press the VOL+ button to confirm. 

- To avoid picture noise (interference), leave an adequate distance between the VCR and TV.

9