Haier L32A9-AKF Owner's Manual - Shuttle Function

Watching TV Program 

You can watch TV program in a  presetting channel.

How to select the desired

program

1

 Using "Program number" buttons.

Directly enter the channel number with the numeric keypad on the remote control.

    If to select channel numbers of double-digit or three-figure ,press continuously the 

numeric buttons in three second. 

2

 Using CH+/- button.

Press the CH+ button to select a channel number in number increasing direction.

 Press the CH- button to select a channel number in number decreasing direction.

How to select the desired

sound

Press VOL+/- button on the remote or the front of the 

TV set to adjust the volume level. The range is 0~100. 

When the volume button are pressed the volume level is 

displayed automatically on the TV screen.

Volume

To select the TV mode

Before watching TV program, you may ensure your TV in TV mode. 

Press TV/AV button to select TV mode.

17

Quick program view 

1

Suppose the channel number you used just now is 8 and the channel 

number you are using is 18 (as shown in the figure).

If you want to return to the last watched program channel 8, you can 

simply press the Q.View  button.

If you want to return to channel 18, press the button again. Use this 

function, you can easily change between the channel you are using and 

the channel you used last Timer. 

2

3 

This function enables quick swap to the last watched program.

Shuttle function

Press SHUTTLE button about 3 second, and  the display Channel Stored 

on the screen, at the time, you may operate other, then if you scan over 

program, you may press again shuttle button to return to the setting 

program.

Shuttle function enables quick swap to setting program.

Channel Stored