Haier L32A9-AKF Owner's Manual - page 29

Adjust Menu  

26

Auto Adjust

Clock

Phase

H-Position

V-Position

I/P Info.                     

1366x768@50Hz

Picture

Sound

Adjust

Tuning Function

Timer

>>>

0

50

50

0

1

Press MENU button and then use VOL+/- button to select 

    Adjust menu .

2

Press CH+/- button to select the item to be adjusted, 

    then press the VOL+/- button to adjust the desired value.

In VGA input mode , H-Position and V-Position can be used to adjust the picture 

position.

When VGA

HDMI input mode is set

 Auto Adjust

This is used to reset the default setting parameters (After 

the operation, Auto Adjusting  will be display on the screen)

  Clock

This is used for adjusting H Position and V Position as well 

as relative parameters in VGA modes.

  Phase

This is used for adjusting the phase of pixel clock  in VGA 

mode. 

  H Position

Horizontal position of picture can be adjusted in this  item.

  V Position

Vertical position of picture can be adjusted in this item.

Note:

 1.As adjusting H position or V position parameter, It is 

 natural that the picture will have faintness once in a 

 while if the range is more, then to adjust contrarily to 

 normal position.

2.As the frequency of display differ in PC device

you 

may select  the appropriate frequency to obtain desired 

effect. If the signal of receive is excess, the picture can 

be not displayed or wrong on the screen.