HoIP Telecom Pebbell User Manual - page 6
HoIP Pebbell SOS Pendant Alarm GPSTracker_V5.0_HoIP_Telecom_01_08_2015
- 6 -
Configuration and Operation by SMS
To Set the Authorized Numbers
It is not mandatory for all three of the authorized numbers to be set, however a minimum of one
must always be set.
① Command:
A1 or A1,phone number
o
Note: With no spaces in the text, case-insensitive.
o
Example: A1 or a1,123456789
Using your mobile phone, send A1 to the phone number in the device, it will reply you a
message: ·
Set mobile number 1 OK!
To delete this number, you can send
A0
to the tracker.
②Command:
B1 or B1,phone number
o
Note: with no spaces in the text, case-insensitive
o
Example: B1 or b1,123456789
The device will reply you a message: ·
Set mobile number 2 OK!
To delete this number, you can send
B0
③Command:
C1 or C1,phone number
o
Note: with no spaces in the text, case-insensitive
o
Example: C1 or c1,123456789
The device will reply you a message: ·
Set mobile number 3 OK!
To delete this number, you can send
C0
NOTE: if you want to use the side call button for two way communication you have to set C1
3. Modify the Time Zone
Command:
TZ+ +00/-00
Note:
the time must amounts be in 2 digits and at maximum 23 hours in value. “+” in the “time zone”
portion of the text indicates east. The symbol “-“in the “time zone” indicates west.
Example:
o
tz+02
, the system will add 2 hours based on the UTC time.
o
tz-02
,
the system will minus 2 hours based on the UTC time.
UTC time has been set as default time.
4. User defined name in SMS content
Command:
name1, user name
Example: name1,Emma
, the tracker will reply
“Add name ok!”