HoIP Telecom Pebbell User Manual - page 9
HoIP Pebbell SOS Pendant Alarm GPSTracker_V5.0_HoIP_Telecom_01_08_2015
- 9 -
11. Listen-in (Voice wiretapping):
Command:
L1
Only A1, B1, C1 number can make a silence call to the tracker, the track answers the call automatically and allows
the caller to listen to what happens around the tracker. There is no voice indication that the call is in progress.
To turn off this function, please send
L0
to the device
.
12. Vibration alarm:
Command:
V1, xx S/M/H
Note:
No space in between, S means second, M means minute, H means hour, xx means the time you set and
must be two digitals.
Example: V1,05M
If user turns on this function, device will detect motion every 5 minutes and will send SMS alarm to all registered
phone numbers for warning.
To turn off this function, please send
V0
13. Shut down 3 LEDs:
Command:
LED1
The device will reply “LED off” and later LEDs will stop flashing, but device is actually running.
To turn off this function, please send
LED0
14. AGPS
Command:
AGPS1
A-GPS is for accelerated positioning and helping position a device when GPS signals are weak or not available. GPS
satellite signals may be impeded by tall buildings, and do not penetrate building interiors well. A-GPS uses
proximity to cellular towers to calculate position when GPS signals are not available.
To turn off this function, please send
AGPS0
14.1 AGPS with known position
Command:
AGPS1, latitude, longitude
Example: AGPS1,48.148899,11.542254
Assisted GPS (abbreviated generally as A-GPS) is a system that is often able to significantly improve the startup
performance or ti-me-to-first-fix (TTFF)and improve the GPS locating to be more precise, of a GPS satellite-based
positioning system
To turn off this function, please send
AGPS0
15. Fall detection
Command:
FL1 or FL2 or FL3 or FL4 or FL5 or FL6 or FL7 or FL8 or FL9
1 means very high sensitive, 2 means high sensitive, 3 means medium high sensitive, 4 means medium sensitive, 5
means medium sensitive low till the 9 means very low sensitive
Device must senses both impact and angle, after that, device must remain in a lying position after 10 seconds, it
will raise alarm
A simple fall may cause a devastating consequence. A Fall Sensor can help you get immediate help without
missing any important moment.
To turn off this function, please send
FL0