HoIP Telecom Pebbell User Manual - page 8
HoIP Pebbell SOS Pendant Alarm GPSTracker_V5.0_HoIP_Telecom_01_08_2015
- 8 -
7. GEO-FENCE Alarm
Command: G
+
X
, Y,
Z,
xxx
M/KM
Example: G
1
,
1
,
1
,
100
M
Notes:
No space in between.
X
=No. of Geo fence (1~3), user can set 3 Geo fences
Y
=0 means to turn off the function
Y
=1 means to turn on the function
Z
=1 means to set alarm when the tracker enters the preset area
Z
=0 means to set alarm when the tracker breaches the district
xxx
is the preset distance to the tracker’s original place, must be 3 digitals. M means meters, KM means
kilometers
The device will send the message to the authorized numbers as “Geo fence alarm!+GPS info” when it
enter
the
area you set. (User must set this function when tracker already fixed GPS signal)
To turn off this function, please send
G1,0 or G2,0 or G3,0
8. Over-Speed alert
Command:
speed1,+ Speed
Notes:
The speed must be in value of speed and in 2 or 3 digitals. (01~255km/h)
Example: speed1,100
Suppose the over-speed alert that we want to set is 100km/h, when the device moves exceeds 100km/h, it will
send message “Over-speed! +GPS Info” to all preset numbers.
To turn off this function, please send
speed0
to the device.
9. GPS signal lost and recovery alert:
Command:
GR1
The device will automatically send the latest available GPS information to the preset numbers when it enters into
the area without GPS signal. If user goes into an area that does not have a GPS signal, such as a tunnel, cave,
parking garage, etc. – the device will know where user was 10 minutes before they went into such an area. This is
critical! If a child goes missing – you’ll be able to know the closest possible location before the GPS signal was lost.
With any SMS sent during the period without GPS signal, the device will reply GPS information to preset numbers
soonest as the GPS signal is covered.
To turn off this function, please send
GR0
10. Movement Alert:
Command:
M1,
xxx
M/KM
Notes:
xxx
is the preset distance to the tracker’s original place, must be 3 digitals. M means meters, KM means
kilometers
Example: m1,100m
When the tracker moves out of 100 meters, it will send SMS alarm to the preset numbers.
To turn off this function, please send
M0
to the device
.