Holux CR-100 Quick Installation Manual - page 11
GPS
HOLUX
Product series
With HOLUX, You never lose the way!
1. Latitude/longitude/altitude
2. Velocity
3. Date/time
4. Error
estimates
5.
Satellite and receiver status
Software interface.
The CR-100 interface protocol is based on the National Marine Electronics
Association's NMEA 0183 ASC interface specification, which is defined in
Ⅱ
NMEA 0183, Version 2.2 and the Radio Technical Commission for Maritime
Services (RTCM Recommended Standards For Differential Navstar GPS
Service, Version 2.1, RTCM Special Committee No.104).
6.3 NMEA Transmitted Messages
CR-100 is smart GPS receiver base on SiRF technology. The default
communication parameters for NMEA output are 4800 baud, 8 data bits, 1 stop
bit, and no parity.
Table 6-1 NMEA-0183 Output Messages
NMEA Record
Description
GPGGA
Global positioning system fixed data
GPGLL
Geographic position- latitude/longitude
GPGSA
GNSS DOP and active satellites
GPGSV
GNSS satellites in view
GPRMC
Recommended minimum specific GNSS data
GPVTG
Course over ground and ground speed
GPMSS
Radio-beacon Signal-to-noise ratio, signal strength, frequency,
etc.
GPZDA
PPS timing message (synchronized to PPS)
HOLUX Technology, Inc.
1F, No.30, R&D Rd. II, Hsin-Chu City 300, Science-based Industrial Park, Taiwan
TEL: 886-3-5526268 FAX:886-3-5526108 E-mail:info@holux.com.tw Website:www.holux.com.tw
9