Holux CR-100 Quick Installation Manual - page 8
GPS
HOLUX
Product series
With HOLUX, You never lose the way!
2. Electric Parameters of the Holder
1. Input
voltage: DC: 12V~24V
2. Output voltage and current:
Output Current Range
Output Voltage Range
Output
Min Max Min Max
DC +5V
0.0A
2A
DC 4.75V
DC 5.25V
3. The operating efficiency is over 60%.
4. Short Circuit Protection
If the anode or cathode of the output end of a car PDA holder is short
circuited, the car PDA holder may be destructed or damaged. It is
necessary to keep a normal holder all the time, since the car PDA holder
has to operate properly as soon as the short circuit is fixed.
5. Noise
The test of this product held in a soundproof room shows that the noise is
less than 20dB when the product is 10 cm from the battery charger.
6. LED
Indicator
There are two LED indicators
(1) A green LED indicator is built at the front end of the holder and turns
on to indicate an input of power supply.
(2) An orange LED indicator is built on the panel of the satellite antenna
and turns on to indicate an input of power supply. The LED indicator
blinks once every second after the 3D fixing position is located.
7. Operating
temperature range: -10 ~ +60
℃
℃
8. Storage temperature range: -20 ~ +80
℃
℃
9. Charging temperature range: +0℃ ~ +45℃
3. Mechanical Performance of the Holder
1. We can assure the reliability of the contact of every interface on the PDA
holder after performing a plug-and-unplug test for 3000 times.
2. The cigarette lighter socket is a universal type that can meet the
requirements for the European, American and Japanese specifications.
3. After each model of PDA is installed onto the PDA holder, the PDA will not
fall out when the PDA holder is upside down.
HOLUX Technology, Inc.
1F, No.30, R&D Rd. II, Hsin-Chu City 300, Science-based Industrial Park, Taiwan
TEL: 886-3-5526268 FAX:886-3-5526108 E-mail:info@holux.com.tw Website:www.holux.com.tw
6