Holzfaller G3MT User Manual - Pole Assembly & Attaching
7
POLE ASSEMBLY & ATTACHING
1Ή
A ach Coupler/Joiner (H) to the end of the pole that does
not have the pre-drilled inxdex hole. Phsical holes are
not neccessary for a aching the joiner. Screws on
coupler or joiner are pressure a ached against pole.
3Ή
Place pole into joiner with index hole facing upwards.
Adjust/Rotate the hole un l it fi rmly clicks into place.
2Ή
Visible holes at the base of the pole are
4Ή
Push down the safety shield fi rmly un l it locks into
place. Once down ghten the T-handle un l its fi rm (to
protect the release mechanism).
5Ή
RELEASE
Release the safety sheild and push down on the release
clip while gently rota ng and removing pole.
H
H
BASE OF POLE
Index hole facing up
TOP OF POLE
Coupler Attaches this end
SCREWS
Screw in Hex screws until
firm against pole.
7
POLE ASSEMBLY & ATTACHING
1Ή
A ach Coupler/Joiner (H) to the end of the pole that does
not
have the pre-drilled inxdex hole. Phsical holes are
not neccessary for a aching the joiner. Screws on
coupler or joiner are pressure a ached against pole.
3Ή
Place pole into joiner with index hole facing upwards.
Adjust/Rotate the hole un l it fi rmly clicks into place.
2Ή
Visible holes at the base of the pole are
4Ή
Push down the safety shield fi rmly un l it locks into
place. Once down ghten the T-handle un l its fi rm (to
protect the release mechanism).
5Ή RELEASE
Release the safety sheild and push down on the release
clip while gently rota ng and removing pole.
H
BASE OF POLE
Index hole facing up
TOP OF POLE
Coupler Attaches this end
SCREWS
Screw in Hex screws until
firm against pole.
H
H
H
H
H
H
H
H
H
H