Holzmann D300F User Manual - page 25
SAFETY
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Seite 25
DRECHSELBANK / WOOD TURNING LATHE D 300F
Never leave the machine running unattended! Before leaving the
working area switch the machine off and wait until the machine
stops.
Always disconnect the machine prior to any actions performed at
the machine.
Avoid unintentional starting
Do not use the machine with damaged switch
The plug of an electrical tool must strictly correspond to the
socket. Do not use any adapters together with earthed electric
tools
Each time you work with an electrically operated machine, caution
is advised! There is a risk of electric shock, fire, cutting injury;
Protect the machine from dampness (causing a short circuit)
Use power tools and machines never in the vicinity of flammable
liquids and gases (danger of explosion)
Check the cable regularly for damage
Do not use the cable to carry the machine or to fix the work piece
Protect the cable from heat, oil and sharp edges
Avoid body contact with earthed
Before starting the machine remove any adjusting wrenches and
screwdrivers
Fix the workpiece with the right tool
Machine only stock which is chucked securely on the machine,
always check before switching the machine on
Provide workpiece with centre holes before clamping between
centres
Before start working remove any nails and other foreign bodies
from the workpiece
Keep any machine that is not being used out of reach of children
Never grab into the running machine!
Remove chips and workpiece parts only if the machine is standing
still!
Never stop workpieces with the hand during run out!
Never take measurements on a rotating workpiece!
N O T I C E
Emergency procedure
A first aid kit in accordance with DIN 13164 should always be readily
available for a possible accident. Initiate the violation in accordance with
the necessary first aid measures. When requesting support, provide the
following details:
1. Place of accident
2. Type of accident
3. Number of injured people
4. Injury type(s)