I-GO Crest CSS User Manual - 5. Operation
PAGE 16
5.5 HOW TO SET TO FREEWHEEL MODE
Foryourconvenience,theCrestCSSisequippedwithafreewheellever.Thisleverallows
you to disengage the drive motors and manoeuvre the chair manually.
To engage the drive and take the power chair out of freewheel:
1. Turn the freewheel lever to “DRIVE” position (left and right).
2. Activation of the joystick automatically releases the brake so the powered
Crest CSS can be driven.
To disengage the drive and place the power chair in freewheel:
1. Turn the freewheel lever to “NEUTRAL” position (left and right).
5. OPERATION
5.6 CIRCUIT BREAKERS
The Power Chair has a circuit breaker protruding through the shroud cover at the right
of the power chair.
Warning
Do not use your Crest CSS Power Chair while the drive motors are
disengaged unless you are in the presence of an attendant! Do not
disengage the drive motors when on an incline as the power chair may
roll down, causing injury!
Suggestion
Ifaleverisdifficulttomoveineitherdirection,gentlyrockthepowerchair
back and forth; the lever should then move to the desired position.
»
In the unlikely event of a short circuit
or heavy overload ,all power to the
powerchairwillbeshutoff.
»
To reset , depress the circuit breaker
button.Afewminuteswaitisrequired
before the circuit breaker will reset.
»
If the power chair continues to shut
down after resetting, have it serviced
by a dealer.