I-SENS CareSens N Pop Owner's Booklet - page 22
40 www.i-sens.com
www.caresens.co.nz 41
Setting the Strip Expiration Date Indicator
Step 1
Enter the Expiration Date Setting
Press and hold the
and
button at the same time for 3
seconds to enter the expiration date settings. After all segments
flash across the screen, “EP” will be displayed on the screen.
Press the
button to change the date.
Step 2
Setting the Year
A number indicating the year will blink
in the left corner of the screen. Press
the
button until the correct year
appears.
Press the
button to confirm the
year and set the month.
The test strip expiration date indicator can be set in the
CareSens N POP meter. The strip expiration date is printed on
the test strip vial.
At any stage, if the
button is pressed for 3 seconds, the
meter will be turned off.
To turn on the indicator function, see page 18 to view how to
turn on the indicator.
Note:
The strip expiration date is printed on the test strip vial.
Setting the Post-meal Alarm (PP2 Alarm)
Step 1
Setting the PP2 alarm On
Without inserting a test strip, press and hold
for 3 seconds to
set the post-meal alarm. The ‘PP2’ character, the ‘alarm’ character
and then the ‘On’ character will be displayed.
The screen will then automatically change to the memory check
mode. At this time, the ‘alarm’ character, indicating that the PP2
alarm has been set, will be displayed on the screen.
Step 2
Setting the PP2 alarm OFF
To turn off the PP2 alarm, press and hold
for 3 seconds. The
‘PP2’ character and the ‘OFF’ character will appear on the screen.
Then the screen will change automatically to the memory check
mode without the ‘alarm’ character being displayed.
The PP2 alarm goes off 2 hours after setting the alarm. The
alarms ring for 15 seconds and can be silenced by pressing
or the
button or by inserting a test strip.
'alarm' vanishes