I-SENS CareSens N Pop Owner's Booklet - page 8
12 www.i-sens.com
www.caresens.co.nz 13
CareSens N POP Blood Glucose Meter Display
Test results :
test results displaying panel
Battery symbol :
indicates meter battery is running low and
needs to be replaced
mem :
appears when test results stored in the memory are
displayed
alarm :
appears when the post-meal alarm has been set
check :
appears when the control solution test results are
saved or displayed
Hypoglycemia symbol :
appears when the test result is below
the hypoglycemic level
Sound symbol :
appears only when the sound is set to OFF
Post-meal test flag :
appears during post-meal testing and
when post-meal test results are displayed
Month / Day / Hour / Minute
Temperature symbol :
displays recorded temperature when
blood glucose levels are tested
Blood insertion symbol :
indicates meter is ready for the
application of a drop of blood or control solution
Decimal point :
appears when the blood glucose measuring
unit is set to mmol/L
mg/dL , mmol/L :
unit for measuring blood glucose
10
12
1
2
3
4
5
6
7
8
9
11
13
1
12
2
3
4
5
6
7
8
9
13
10
11
Note:
The unit of measurement is fixed in mmol/L and it
cannot be changed to mg/dL by the user.
Note:
The cable for data transmission to PC can be ordered
separately. Please contact your authorised i-SENS sales
representative.
CareSens N POP Blood Glucose Meter
Data Port
Used to transfer data
from the meter to
a computer with
the cable available from
your authorised i-SENS
representative.
S Button
Turns the meter on/off,
confirms menu selections,
and changes information
Display
Shows results,
messages
Test Strip Port
Insert test strip
here
>> Button
Selects or
changes
information