I-SENS e-Checker Owner's Booklet - Replacing Batteries
16
17
Test Strip Storage and Handling
For safe and optimum use:
• Store test strips only in their original bottle.
• Store bottle in a cool and dry place between 1-30 ˚C (34-86 ˚F).
• Keep bottle away from direct sunlight and heat.
• Do not refrigerate or freeze test strips or bottle.
• Close bottle cap tightly immediately after removing a test strip.
• Use test strip immediately after taking out of bottle.
• Handle test strips only with clean and dry hands.
• Do not bend, cut or alter test strips in any way.
• Do not force a test strip into the meter.
• Apply only fresh whole capillary blood to test strip.
• Test strips in new, unopened containers and test strips in
containers that have been opened can be used up until the
expiration date printed on the test strip box and container label
if the test strips are used and stored according to its storage and
handling methods.
• Do not use test strips beyond the expiration date.
• Do not reuse test strips.
Keep test strips and the test strip bottle away from
children. The test strips and bottle cap may be choking
hazards. Drying agents in the bottle cap may be harmful
if inhaled or swallowed or may cause skin or eye
irritation.
Helpful Tip
For detailed storage and usage information, refer to the
e-CheKer Test Strip package insert.
Replacing Batteries
If you insert the battery upside-down on the first try, it will
get stuck!
Step 1
Step 2
Step 3
Press down slightly and push the
battery compartment cover in
the direction of the arrow shown,
to remove it.
Remove the old battery to replace
with a new one.
Place the battery into the
compartment on the cover with the
"+" side facing inside the
compartment so that once
inserted, the "+" side is not visible.
※ The compartment cover
might not open if the battery is
placed upside down.
Please do not attempt to remove
it by force. If this happens, and
contact the i-SENS representative
in your area.
Press down slightly and push the
battery compartment cover in
the direction of the arrow shown,
to insert it.
Correct position of the
battery. (The”+” side is
not visible.)