IBeam TE-360 User Manual - Cloth
8
7. Placement of the measuring tape and checkerboard
cloth
1 ). Requirement of the tools
4pcs of 7m measuring tape
4pcs of 1.6x 1.2m checkerboard cloth.
2). Placement of the measuring tape and checkerboard cloth
Placement Sequence: firstly, put front and rear first, and than put left and right
Press the power button on the remote controller--choose OK button--choose
set up button--choose surround view and smartjoint--AV3 show the front
camera on display--pull out the measuring tape and you can see the measuring
tape location from the display. Put the 1.6m(the wider sized) check board cloth
close to measuring tape and put in the center of the car.
Placement of the front checkerboard cloth and measuring tape: put
the tape just outside of the bumper. put the cloth close to the tape and
in the center of the car head.