IBM -3460 Installation And Operating Manual - page 14
25
Changing the Handset Settings
You can change the setting on the handset in the
options menu.
In the menu options the settings that can be changed
are:
• Ringer Tone Change the way the ringer sounds on
the handset or turn ringer off.
• Time and Date Setting Change the time and
date.
• Home Area Code Setting your home area code for
Caller ID dial back.
• Local Area Codes You can set your local area
codes if you have 10-digit dialing for Caller ID call-
back. You can have as many as eight local area codes.
• Call History Will allow you to select the Caller ID storing options: Save "ALL
CALLS," save "UNANS CALLS" (unanswered calls), or save "NO CALLS."
• Repeat Calls Will allow you to select the way repeat Caller ID calls are
stored: "SEPARATE" will store the repeat calls as separate entries,
"COMBINED" will store the repeat calls as one entry and the "RPT" icon will
display for these calls.
• Call List Order Will allow you to program how you view the calls: "BY TIME"
shows the first call received to the last call received, or "NEW CALLS" shows
the new Caller ID calls first then the old calls.
Note: At any time during options programming you can quit and the settings
that you have selected will be saved. Quit the options menu by pressing
and holding
H/MENU or let the options programming time out by not
pressing any keys for 20 seconds.
Tip:
If within your local area you are required to dial 10-digits (XXX-XXX-XXXX)
to dial a local number, use the “LOCAL AREA CODE” programming. In
this case do not use the “HOME AREA CODE” when setting up for Caller
ID call back.
Press and hold the
H/MENU key until the display shows "RING TONE: A." You
are now in the options menu.
Handset Settings
HANDSET SETTINGS
.
+ -
+ -
+ -
+ -
+ -
+ -
H
H
H
H
H
H
H
HANDSET SETTINGS
1
2
3
4
5
6
7
8
9
0
#
OPER
WXYZ
TUV
PQRS
MNO
JKL
GHI
DEF
ABC
NEW
CALL
VOLUME
REDIAL
FLASH
CHAN
TONE
CID
DELETE
MEM
MENU
HOLD
Hold/Menu Key
Up/Down Keys
26