IC Realtime CONSOLE-5X User Manual - Playback/channel Changing
IC-CONSOLE-5X – User Manual
Playback/Channel Changing
The DVR local user has the higher priority than then keyboard user. Before you login,
please logout the DVR local menu user, otherwise, you can not use the keyboard to
control the device.
a) Click ENTER on the keyboard, you can go to the menu options interface.
b) Select zones.
c) Input the ID, device name, IP address.RS232, RS485 which you have set on the control
point interface, Click ENTER to begin the search.
The system can automatically connect to the DVR if the search is successful.
If the system pops up with a dialogue box to inform you the address does not exist,
Please check the information and input again.
Note
Click ID on the keyboard and then input ID number. Click ENTER to quickly find the device.
Logout
Click ID on the keyboard and then click ESC to exit.
Playback
When PLAY is pressed on the keyboard; you will be brought to the DVR search interface.
Use the joystick to control the playback buttons and click ENTER to confirm. See the image
below for an example of what this should look like.
Record
On the keyboard, click AUX and 1 at the same time,to go to the DVR record control
interface. Use the joystick to set channel number and status. Click ENTER to save current
setup.