Iccons GTI-140 User manual - 7 Technical Specification
13
Serious Connections
TM
ICCONS™ GAS TOOL GTI-140 USER MANUAL
7 Technical Specification
7.1 Gas Nailer
Model No.
GTI-140
Dimensions
Length 530 mm
Height 120 mm
Width
360 mm
Weight 4.2 kg
Recommended Usage
600/Hr
3,000/Day
Vibration
The vibration/mechanical impact risk is
low, it is the users’ responsibility to ensure
that the operators are not put at risk due to
environmental and work piece specifications.
7.2 Fuel Cell
Model No. FC165G
Dimensions
Height
165 mm
Diameter 32 mm
Pressure
18 bar
Capacity
700 shots
Fuel cell contains pre-mixed fuel and
lubrication. No extra lubrication required.
Warning! Only specified Fuel Cell and Lubricant
by ICCONS can be used on the tools, please
consult the ICCONS agents or local distributors.
7.3 Fastener
Dimensions
Insulation Thickness
25-140 mm
Pin Head Diameter
Ø6.3 mm
Pin Length
47-52 mm
Shank Diameter
Ø3.65/3.2 mm
Applications
Insulation Thickness
25-140 mm
Only those fasteners which are specified in
this specification shall be used in ICCONS
Pty Ltd Gas Tools. The ICCONS Pty Ltd Gas
Tool and the fasteners specified are to be
considered as one unit safety system.
The adaptor, charger and the battery are
designed to operate together as one system.
7.4 AC/DC Adaptor
Model No. BCA1215
BCA1215(ANC) TYPE I
- AS/NZ
BCA1215(EU)
TYPE C
- EU
BCA1215(UK)
TYPE G
- UK
BCA1215(US)
TYPE A
- US
Input
100-240V ~ 0.6A Max. 50/60Hz
Output 12V DC 1.5A
7.5 Battery Charger Unit
Model No.
GT-BCU
Input
12V DC 1.5A
Output
7.3V DC 700mA
Charging Time
2.5 Hours
Battery Type
ICCONSB6VMH
7.6 Battery Cell Pack
Model No.
GT-BCP
Type
Ni-MH
Output
6V DC
Capacity 1.5Ah, 5 cells
8 Tool Serial Number
Located on the tool handle near the track
connection.
YY MM XXXX
YY - Year of construction (last two digits)
MM - Month of construction
XXXX - Tool serial number