1. DL manuals
  2. Iclebo
  3. Vacuum Cleaner
  4. YCR-M05
  5. User Manual

Iclebo YCR-M05 User Manual

Summary of YCR-M05

  • Page 1

    Ycr-m05 user guide vacuum cleaning robot iclebo pop ■ please be sure to read the safety precautions before use. ■ please keep the packing box for further customer service needs. Www.Iclebo.Com/english.

  • Page 2: ●

    1 safety precautions components and detailed names reference installing the robot cleaner usage of robot cleaner care & maintenance storage check before repair report display check message remote control details for best cleaning operation principles of robot vacuum cleaner • principles of running •...

  • Page 3: ●

    2 this content is for the user’s safety and to prevent any property loss. Read the below carefully and use it with care. - do not force to bend the power cord or pressure it with heavy weight. → it may cause electric shock or fire. - keep the pin and interface of the power plug clean from dust or wa...

  • Page 4: ●

    3 - do not touch the power cord of the charger with wet hands. → it may cause electric shock. - arrange any cables or wires before use to avoid them being wrapped or caught by the robot → it may cause fire or electric shock due to damaged cable. - remove light objects or clothes before use. → it may...

  • Page 5: ●

    4 - in case the robot cleaner has unusual sound, smell or smoke turn off the robot immediately and place well away from flammable objects. → it may cause electric shock or fire. - do not use the robot cleaner on the table or any place high. → it may damage the product. - in case of particular hardwo...

  • Page 6: ●

    Ycr-m05 quick guide vacuum cleaning robot iclebo pop ※ for more detailed instructions refer to the enclosed cd (the complete user manual also can be downloaded from our homepage.) 5 components detailed names of each part charging station remote control (included battery) side-brush antibacterial fil...

  • Page 7: ●

    Using remote control 1. Press start/stop( )button of the remote controller. 2. Press start/stop( ) button or power button to stop cleaning 3. Operating spot mode( ) is only available by remote control 4. When base button( ) of remote control is pressed during cleaning cycle, pop will return to charg...

  • Page 8: ●

    7 operating principles of robot cleaner principles of running iclebo pop operate random and spot cleaning mode with recognizing obstacles via various sensors. With about 20 detection sensors, it can avoid walls or objects (chair, vase, etc) it climbs a doorsill of up to 18mm, and floor sensors help ...

  • Page 9: ●

    Open check list before using 8 1. After flipping over the vacuum cleaning robot, verify the positions of the side brush. 2. Match the side brush in the same direction of the groove, and push in hard. Assemble ultra microfiber mop 1 2 mop plate there is no battery inside the remote controller at the ...

  • Page 10: ●

    3 9 precaution before using open the cover of the backside of the charging station, and install the adapter with connected power plug as in the figure. 1. Turn on the power switch on the side of the product. 3. The battery is fully charged, the battery status on display will be green. 2. Match the c...

  • Page 11: ●

    Auto max 15 30 90 auto max 15 30 90 usage of robot cleaner start/stop cleaning 1. Press start/stop(or power) button. ( ) (turn on with alarm sound) 1. Turn over the robot as shown in the picture. 2. Attach mop on the mop plate after microfiber wet mop soaked in water and then wrung out. 3. Turn over...

  • Page 12: ●

    2 1 3 auto max 15 30 90 climb mode button auto max 15 30 90 set cleaning time set cleaning time press time button to set cleaning time( ). Every time you press the button, the time will be changed according to following order (15 minutes - 30 minutes - 90 minutes - max) ● set cleaning time movement ...

  • Page 13: ●

    Click 1. Empty the dust bin first. 2. Turn the robot cleaner over and place the bottom facing upright. 3. Unlock left/right fixed clip of the main brush cover. 4. Separate the brush cover then remove the main brush. 5. Clean the hair or foreign substances stuck on the main brush using the cleaning b...

  • Page 14: ●

    Cleaning front-wheel click 1. Press the front-wheel fix clip with both hands and lift it up to separate. 2. Remove foreign substance on the front brush using the cleaning brush. 3. Pull out the front-wheel then clean dust and foreign substances using the cleaning brush. As for the main brush, remove...

  • Page 15: ●

    Storage 1. If the vacuum cleaning robot is not used for a long period of time, turn off the power switch on the side of the main body. ※ please be aware that the battery could be discharged. 2. Keep the robot cleaner away from direct sunlight rather place in well-ventilated place. ※ please do not st...

  • Page 16: ●

    15 faq if you can’t solve the problem with information below, please call your customer service center. Problem cause solution it is not cleaning well. ▶dust bin is full. ▶main brush is dirty. ▶filter is contaminated. ▶see and empty the dust bin. ▶see and use main brush. ▶see and clean the dirty fil...

  • Page 17: ●

    Noise of the robot cleaner is getting worse. ▶dust bin is full or filter is dirty. ▶main brush is dirty or hairs are accumulating between the main brush and the bearing. ▶empty and clean the dust bin. ▶see (page 12) and clean the filter. ▶see (page 12) and clean the main brush. Check display cause s...

  • Page 18

    Ipmn.En.V0 ※ yujin's robot vacuum cleaners were designed to meet the energy star energy efficiency standard, it has the best energy efficiency in charging & standby mode. Iclebo pop (ycr-m05) 100v ~ 240v below 0.1w 10w lithium ion (li-ion) 35 cm 8.9 cm 2.75 kg 30cm/s sterilization filter ir, psd, en...