Iclebo YCR-M05 User Manual - ●
15
FAQ
If you can’t solve the problem with information below, please call your
Customer service center.
Problem
Cause
Solution
It is not
cleaning well.
▶Dust bin is full.
▶Main brush is dirty.
▶Filter is contaminated.
▶See
and empty the dust bin.
▶See
and use main brush.
▶See
and clean the dirty filter.
Power switch
is turned off.
▶Battery is low.
▶Battery is not inserted
properly into the robot cleaner.
▶It is because main brush is
clogged with hair and dust.
▶Re-charge the robot cleaner.
▶See
and empty the dust bin.
▶See
and clean the dust bin.
The robot is
not responding.
▶Power switch is turned off.
▶Battery of remote controler
is out.
▶Infrared sensor & beam part
of the remote control is
blocked or dirty
▶Remote control is too close
to the charging station.
▶Check the power switch on the bottom
of the main body.
▶Re-charge the robot cleaner.
▶Insert the battery of robot cleaner properly.
▶Change the battery of the remote control.
▶Wipe the infrared sensor & beam part of
the remote control with a soft cloth.
▶Keep a distance from the home station
and press the button again towards the
robot cleaner.
The robot is not
charging.
▶Charging station or robot
cleaner is not connected
properly to the plug.
▶Check charging station or robot cleaner
is connect properly to the plug.
After cleaning,
the robot
cleaner is
not returning
to the charging
station.
▶Home station or robot cleaner
is not connected properly to
the plug.
▶Generator & ejector on the
home station and detector of
the robot cleaner is dirty.
▶Connect the power of the home station
properly.
▶Move the home station. No objects must
be placed within 50 centimeters left/right,
1.5meters in front of the home station.
This is to enable the robot cleaner to return
to the home station automatically after
cleaning.
●
C
H
E
C
K
B
E
F
O
R
E
R
E
P
A
IR
R
E
P
O
R
T