Icom IC-F110 Instruction Manual - page 12
9
2
OPERATION
D
TX code channel selection
If the transcever has a
[TX CH]
key, the dsplay can be tog-
gled between the operatng channel number (or name) and
TX code channel number (or name). When the TX code chan-
nel number (or name) s dsplayed, the
[
]
/
[
]
keys select
the TX code channel.
To select a TX channel:
q
Push
[TX CH]
—a TX code channel appears.
w
Push
[
]
/
[
]
to select the desred TX code channel.
e
After selectng, push
[TX CH]
to set.
• Returns to the stand-by mode.
r
Push
[CALL]
to transmt the selected TX code.
D
TX code number selection
If the transcever has a
[TX CH]
key, TX code contents can
be changed wthn the allowable dgts.
To select a TX code:
q
Push
[TX CH]
—a TX code number appears and the first
dgt blnks.
w
Push
[
]
/
[
]
to select the desred number of the blnk-
ng dgt.
e
Push
[TX CH]
to enter the selected number and the next
dgt wll start blnkng automatcally.
r
Repeat step
w
and
e
to nput all allowed dgts.
t
Push
[CALL]
to transmt the selected TX code.
D
DTMF transmission
If the transcever has a
[DTMF]
key, the automatc DTMF
transmsson functon s avalable. Up to 7 DTMF channels
may be avalable.
To transmit a DTMF code:
q
Push
[DTMF]
—a DTMF code channel appears.
w
Push
[
]
/
[
]
to select the desred DTMF channel.
e
Push and hold
[DTMF]
to transmt the DTMF code on the
selected DTMF channel.
D
Scrambler function
The UT-109 (#02) or UT-110 (#02) optonal voce scrambler
unt provdes hgh performance prvate communcaton be-
tween statons wth the same scrambler codes.
To turn the scrambler function ON and OFF:
q
Push and hold
[SCRM]
to turn the scrambler functon ON.
w
Push
[SCRM]
to turn the functon OFF.